Compact device for connection to a Daly (or rebranded) BMS and 100Balance BMS for integration into the smart home.
The included cable is simply plugged into the corresponding socket (UART, instead of the cable from the BT dongle).
No external power supply is necessary.
Comes pre-installed with the latest firmware.
Features:
- complete power supply via the BMS, no power supply or anything similar necessary
- Firmware wake function
- Communication lines galvanically isolated from the BMS
- Integrated wake button on the board
- Possibility of connecting an external wake button
- Possibility to connect a relay
- self-resetting fuse (GND loop)
- LED indicator for active wake from the firmware
- Optional connection of external temperature sensors type DS18B20 via 1-wire board
Features:
- Captive portal for WiFi and MQTT configuration
- Configuration in the web interface
- Switching of MOS gates via web interface, MQTT and via web
- Set SOC via MQTT
- Retrieve essential data via web interface
- Get all data like cell voltage and more via MQTT
- classic MQTT data points or JSON string via MQTT
- Retrieve JSON via web at/livejson?
- Firmware update via the web interface
- Wake up or keep awake BMS via MQTT (wake up only via external power supply)
- Universal switching output
- Blink codes for the current status of the ESP
- HomeAssistant Discovery
- Password protection (if activated)
Compatible with the following manufacturers:
- Daly (confirmed)
- BullTron Polar series (confirmed)
- Hi-BMS (confirmed)
- XENES (confirmed)
- 100Balance (with corresponding connection cable and firmware)
- others using Daly-rebranded BMS (list will be updated as it becomes known)
Delivery includes a connection cable to the BMS, 30cm long
Project page: https://github.com/softwarecrash/Daly2MQTT
Deutsch 
English 
Español 
Français 
Italiano 
Português 
Українська 
Super Teil, endlich kann ich die Daten über meinen Home Assistenten abrufen. Es ist das, was ich mir vorgestellt habe.
For that price, I'll pass on the soldering iron 😎
I'm very satisfied!
Only the reset and wake buttons sometimes fall off; otherwise everything is fine. All 20 are still working perfectly. 😉
The antenna connector didn't fit, but this was fixed immediately 👍
Great! Connect, enter router details, enter MQTT data, and it's up and running within 2 minutes!