Description

Relay with pre-assembled cable (cable colors may vary) for connection to the Daly2MQTT board from version 2.

With this relay the functionality of the Daly2MQTT boards can be expanded.

Typical switching scenarios:

• Lowest/highest cell voltage
• Lowest/highest battery voltage
• Lowest/Highest Temperature
• via the Daly2MQTT web interface or via MQTT

Relay load capacity:

AC: 250V/10A
DC: 30V/10A
However, never take the maximum load as a basis. Significantly higher inrush currents can occur when switching on the consumers connected to the relay.
For higher loads, the relay can also be used as a so-called auxiliary relay, for example to control contactors.

Note on dealing with electrical currents:
When working on electrical installations, the specified limit values for Low voltage of 50 V AC (alternating voltage) or 120 V DC (direct voltage). risk of death!
Work above the limits of 25 V AC (alternating voltage) or 60 V DC (direct voltage) should and may therefore only be used by trained specialist staff be executed.